by heere7446 | Jan 26, 2021
MEZZANINE FLOOR FRAME On this project we installed a 10X8mtr (30X24ft) mezzanine floor frame into an new build apartment block. All installation and fabrications took place on site for this... 
by heere7446 | Jan 26, 2021
CRANE REPAIR This was certainly our most unusual location for a job so far…200ft in the air!! We were asked to help one of our customers for a welding repair job on a tower crane that was out of commission on one of their sites so we jumped right in (or up!) and fixed... 
by heere7446 | Jan 26, 2021
INTERNAL PROPS For this project we fabricated and installed 3X24mtrs internal props @ 600mm diameter to sustain the internal walls of an existing building that was going through some extensive refurbishment. Due to limited access we had to splice the props into four... 
by heere7446 | Jan 26, 2021
SUPPORT BEAM On this project we installed a 6mtr (20ft) 203X203X46 support beam into an office block which will be converted into apartments later this... 
by heere7446 | Jan 26, 2021
GANTRY For this project we fabricated and installed a 24X5mtr (78X16ft) gantry to sustain the front façade of an existing building that was being refurbished in West London. The gantry was also built to support and house a site office porta cabin. All fabrication... 
Recent Comments